Storage Accessories and Remote Control
Accessories noted below with a yellow ” * ” are available for purchase through Cinedeck directly or your local authorized Cinedeck reseller. Other items are standard off-the-shelf items available from resellers worldwide.
MEDIA OPTIONS AND ACCESSORIES
Cinedeck only recommends and supports Samsung SSD Drives for internal recording media, specifically:
- Samsung Pro series (highest performance, longest warranty)
- Samsung EVO (best Price/capacity)
Each Cinedeck comes with one or more standard drive carriers which hold up to 2 SSDs each.
- Item #15001*: Each Cinedeck system comes with these drive carriers. Additional drive carriers may be purchased as required. RX2 Ships with one standard SSD carrier ZX20 Ship with two standard SSD carriers ZX40, and ZX45 Ship with four standard SSD carriers.
- Item #15003*: These optional single drive carriers with built-in USB-3 port fit in the same chassis as the standard dual-drive carriers so can be used interchangeably with standard carriers.
Only one SSD can be enclosed in the USB-3 carrier. Note; It is not possible to simultaneously connect the USB while the drive carrier is installed and active in a chassis.
- Item# 15005*: Internal receiving chassis – Designed to accept Cinedeck drive carriers and fit a standard 3.5” drive bay in a typical PC workstation. Requires two SATA connections and a power connection.
- Item #15004*: Drive carrier and internal chassis set – Includes the chassis plus a drive carrier.
While the list continues to grow, the above list are some NAS and SAN solution manufacturers whose products are known to be used with Cinedeck products.
Item # 11004*: ZX Rack Kit
Rack rails are for 19″ standard chassis or Cabinet and come with 2 mounting ear and screw sets. Slide rails are extensible up to 33″.
At this time, rack mount kits are not available for the RX2
REMOTE AND CONTROL OPTIONS
Cinedecks provide multiple pathways for remote access and control including RS-422 and USB, allowing the use of an array of off-the-shelf control panels. Additionally, ZX can be optionally equipped with a surface mount version of the MX tactile control panel. Ethernet based control is available via the AMP and VDCP protocols. (Note: Cinedecks run Windows 7 Embedded as the OS however; “Windows Remote Desktop” should not be utilized.)
At the most basic level, each primary Cinedeck channel has a bi-directional RS-422 port, accessible to devices such as those from DNF that typically run a BVW or SRW deck. Each Cinedeck channel can fully replace a traditional RS-422 controlled VTR, also for tasks such as Digital Cut from an Avid. In addition, Cinedeck channels can be controlled via VDCP over RS-422.
Third party RS-422 controllers include:
- DNF ST100 and ST400
- Controllers by JLCooper
- Controllers by Lance Design
That same RS-422 port is reversible, allowing the Cinedeck to control an attached device such as a VTR using BVW or SRW commands.
Cinedecks support AMP, Grass Valley’s control API over Ethernet.
AMP provides hooks for full setup and operational access and is the path for custom asset management system integration or other deeper system incorporation. AMP is also the API used by the Cinedeck multi-channel control application for controlling multiple channels across several Cinedecks.
Cinedeck’s IP based MCC (Multi-channel Control Application) starts with a free version, capable of basic Start/Stop record control for up to eight Cinedeck channels across multiple machines.
The next step up is an enhanced version with event-based, DVR like scheduling. Events are channel based, can include the “Break” command and include the ability to select a specific project, making it very easy to automatically change the complete configuration of a channel from one preset to another.
The Cinedeck MCC system utilizes the AMP protocol, giving it the potential to completely setup and control more than eight channels across many machines. Access to more channels, additional functions and user interface modifications are all possible. Contact us for more information and to see if the system can meet your requirements.
Many facilities control their Cinedecks utilizing one of the many VNC applications. Cinedeck’s development and support teams access decks every day using TeamViewer and many customers employ TeamViewer as well as open source control packages such as Tight VNC and Real VNC.
Note: Cinedecks run Windows 7 Embedded as the OS however; “Windows Remote Desktop” should not be utilized.
All Cinedecks support standard USB control devices. A USB keyboard and mouse are recommended for basic setup and operation in many environments and control panels such as those from JL Cooper, Contour Design and P.I. Engineering can optionally be used.
In addition, Cinedeck ZX can have a Jog/Shuttle installed on the right front panel for a VTR like installation. Third party USB controllers include:
- X-Keys Jog-Shuttle XK-12 controller by PI Engineering (www.xkeys.com)
- Shuttle Xpress and ShuttlePro V2 by Contour Designs (www.contour-designs.com)
- Logitech R800 remote (www.logitech.com)
All Cinedecks support external displays for the user interface and video preview, including touchscreens. HDMI is the best connection type though some Cinedecks also include Display Port connections.
Below is a short list of Touchscreen Monitors that have supported Windows 7 in the past. It is important to confirm with the manufacturer that the current model or its replacement does support the Windows 7 built-in HID drivers.
- Planar Helium PCT2785
- Dell ST2220T
- HP Compaq L2206tm
- Planar PX2230MW (Note: this model has been tested with Cinedeck)
- Planar PXL2430MW