5"h - 8"w - 3.5"d (12.7cm x 20.3cm x 8.9cm); 4lbs (1.8kgs)
Rugged anodized aluminum enclosure and solid-state construction for extreme durability
Choice of Anton Bauer or Gold V-Mount battery mounts
Built-in wide input DC power: 12-28V via wall adapter or industry standard battery
MONITORING
Simultaneous pass thru of incoming signal for on-set/EVF monitoring
Realtime HD to SD downconvert for on-set monitoring
Realtime SD to HD upconvert
VGA display clone for secondary display with interface
Stereo headphone jack for audio monitoring
RECORDING
Records all Apple ProRes formats including 4444, all Avid DNxHD formats (MXF
or .MOV), Avid Meridien JFIF, CineForm, uncompressed 444 (10-bit) HD, or
uncompressed 4:2:2 (8 or10-bit) HD (.MOV), AVC-Intra, XDCAM HD, XDCAM EX,
H.264, or DPX onto 2.5" SSD disk
SUPPORTED RESOLUTION AND FRAME RATES
HD - 1080 50/60i
HD - 1080 23.98/24/25/29.97/30 P/PSF
HD - 1080 50/59.94/60 P/PSF (CineForm Only)
HD - 720 P 50/59.94/60
SD—PAL/NTSC
SI-2K Uncompressed 12-bit RAW 2K (via SI-2K Option)
SUPPORTED CODECS
Apple ProRes: 4444, 422 (HQ), 422 (Normal), 422(LT), 422 (Proxy)
Uncompressed 444 (10-bit) or 422 (8 or 10-bit) (MXF Op Atom, Cineform, .MOV)
AVC-Intra class 50 (MXF Op Atom)
XDCAM HD 50 / XDCAM EX 35 (MXF Op-1a, MXF Op Atom, MP4 wrapped)
H.264 (AAC Audio and MP4 wrapped)
DPX (with Cinedeck SSDs)
DISPLAY
Large 7" high-res (1024×600) touchscreen display for realtime
preview, focus, and review. 250 NITS brightness standard
(1000 NITS Hi-Brite option available and recommended for direct
sunlight environments)
Realtime composite and per-channel waveform, vectorscope and
histogram for accurate quality control; available in overlay or full
screen mode
Intuitive gestural touchscreen interface designed for field recording…
most commonly used controls are also accessible via physical buttons
on the front panel; most overlay functions available during record
OTHER FEATURES
Realtime upconvert/downconvert/crossconvert between more than a dozen resolution/frame rate combinations
Battery meter; disk capacity warning tally for peace of mind
SDI Link or internally generated timecode support on ingest with on-screen timecode display and programmable offset/start values
Master Clock timecode module for jamsync to external clock source (HW option)
Garmin GPS data support
Long distance remote operation via ethernet or WiFi
Battery life: up to 1.5 hours continuous recording time on a single 1.5 Li-ion battery, up to 5 hours with stacked IDX Endura Elite or equivalent
16 1/4" and 3/8" threaded mounting points top and bottom for flexbility
